![]() resistance to weather conditions (humidity, electrostatic discharges and others).resistance to electromagnetic interference.high-volume information transfer via single fiber. ![]() for the wavelength of 1550 nm the attenuation is about 0.2 dB per kilometer, which means that the signal can be sent at a distance of 200 km - without regeneration) possibility of sending signal over long distances (low attenuation of optical fibers - e.g.The radiation invisible for the human eye can damage the retina! NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. Durable laser diode with Fabry-Perot resonator ensures the mean-time-between-failure (MTBF) at least of 100000 hours (more than 11 years). The LED indicators show current operating status. Their installation is very simple thanks to "Plug and Play" feature. ULTIMODE M-023G media converters are fully compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3z standards. "Store and forward" mechanism allows to verify the received data using checksum function. ULTIMODE devices have MDI/MDIX auto detection feature and automatically find and set the fastest connection speed and mode. Optical signal is transmitted and received in the second transmission window of 1310 nm. The media converter has two SC connectors used to transmit (Tx) or receive (Rx) the signal. ULTIMODE M-023G is reliable media converter enabling the transmission of Gigabit Ethernet data signal in two multimode optical fibers at distances up to 2 km. Fiber distance support: up to 2 km / 1.24 mi ( 62.Ethernet media converter ULTIMODE M-023G allows to change electrical signals (Ethernet data signal) coming via typical STP/UTP cable into modulated light signal transmitted via multimode fiber cable.One 100Base-FX multi-mode Fiber ST duplex port.RJ45 port with Auto MDI/MDI-X support and auto-negotiation.One 10/100Base-TX RJ45 port, maximum distance 100 m / 300 ft.Several converters can be simultaneously installed into a 19" rack-mountable chassis. ![]() The compact size of the converter allows it to be easily deployed in any narrow desktop location or to be used in a wall-mount installation. Network managers can install fiber cabling anywhere within a network without changing the arrangement of copper-based Ethernet. This can be achieved by direct connection between the converter and a fiber-based node or networking device. Also provides building-to-building connectivity without the need for the cost and disruption associated with the installation of additional routers.Įnhances the Distance between Networking DevicesĬonnecting the converter to fiber segments can further extend distances between networking nodes. Provides fiber connectivity to Ethernet segments, allowing for even further networking expansion between extended workgroups. The converter is completely transparent to the network so the network performs exactly the way it did before – only now it can support both copper and fiber mediums. Now migration or expansion of existing networks can be achieved with minimum cost and complexity. The INTELLINET NETWORK SOLUTIONS Fast Ethernet Media Converter was specifically designed to offer the network designer a device for migration from copper-based Ethernet to Fiber Ethernet.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |